R3 Hardware
R3 Hardware is listed as a Honesdale, PA shop for generators. Public sources connect this listing with Generac and Husqvarna. Source note: Exact 401 Main St, Honesdale, PA 18431 identity confirmed by official site; phone 570-253-4075.
What to expect
R3 Hardware is a Honesdale-area shop handling generators. Manufacturer tier status includes Honda GG and Husqvarna Is_Crown_Dealer — relevant for warranty work and OEM parts. Typical generators repair runs $60–$150; schedule service before storm season — shops fill up fast when the power grid strains.
Before you call
- 1Note the wattage rating and model number from the label
- 2Describe the symptom — won't start, surges, runs rough, or low voltage
- 3Mention the last time it ran and how long it was stored
- 4Ask if they test under load before returning the unit
- 5Ask about wait times — shops fill quickly ahead of storm season
Hours
Call to confirm current hours.
Equipment types
Location
401 Main St
Repair guides for R3 Hardware customers
Why Won't My Generator Start? 8 Common Causes (And What To Try)
Quick troubleshooting guide for generators that won't start. Most no-start issues come down to fuel, ignition, or air — and you can usually fix them yourself.
How to Prepare Your Generator for Hurricane Season
A pre-storm generator checklist that takes about an hour. Most generator failures happen because of skipped maintenance, not bad luck — here's what to check before the season starts.
Generator Repair Costs by Problem (2026)
Generator repairs typically cost $60–$400. Compare prices for carburetors, no-power faults, starters, fuel systems, tune-ups, and major repairs.
Small engine parts on eBay
As an eBay Partner, we may be compensated if you make a purchase.
Other shops in Honesdale
If R3 Hardwaredoesn't answer, try one of these.